Your Software. Our Hardware.
SPI Matrix and LEC3 speak the open Art-Net and sACN standards, so they work with the media servers, pixel mapping tools and lighting consoles you already use: MADRIX, grandMA, Resolume, MadMapper, ChamSys, Enttec ELM and more.
Works With
Software and consoles in real workflows
MADRIX
Pixel mapping and LED effects. Add the controller in the Device Manager on the Art-Net tab.
Resolume Arena
VJ software and media server. Finds Art-Net devices on the network or sends to a set IP address.
MadMapper
Projection and LED mapping that outputs Art-Net to the controller's universes.
grandMA & ChamSys
Lighting consoles that patch the controller like any other Art-Net or sACN node.
Enttec ELM
LED media server software for video playback on pixel installations.
Any Art-Net or sACN source
Open standards, so any software or console that outputs Art-Net or sACN can drive the pixels.
Setup
Add the controller like any Art-Net node
In most software you add SPI Matrix as an Art-Net device: search the network or type the controller's IP address, then patch your fixtures to its universes. In MADRIX that happens in Preferences → Device Manager on the Art-Net tab, see how to use MADRIX with our controllers.
Resolume Arena finds Art-Net devices on the network and can broadcast or send to one device. If SPI Matrix doesn't respond when picked from the list, enter its IP address manually, as shown in SPI Matrix and Resolume Arena.
- Search the network or add the IP address manually
- Universes counted from 1 on our devices
- MadMapper setup guide
- How the Art-Net & sACN decoder works
LED Strip Studio
Or combine them with LED Strip Studio 4
LEC3 comes with a lifetime LED Strip Studio license. Map the installation in LSS4 and still bring in video from Resolume or MadMapper through Spout, as explained in using Resolume or MadMapper video with LED Strip Studio.
Third-party software stays in charge of the content, LED Strip Studio handles the mapping and the controllers.
- Lifetime LED Strip Studio license with LEC3
- Video from Resolume or MadMapper through Spout
- Art-Net in LED Strip Studio
FAQ
Compatibility questions
Any software or console that outputs Art-Net or sACN, including MADRIX, grandMA, Resolume, MadMapper, ChamSys and Enttec ELM. Full answer in 3rd-Party Software Compatibility.
No. Art-Net and sACN are open standards, so third-party software drives the controller directly. The third-party software itself may need its own license. Full answer in 3rd-Party Software Compatibility.
Enter the controller's IP address manually instead of picking it from the device list. See SPI Matrix and Resolume Arena. More in SPI Matrix/Reactivo And Resolume Arena.
Our devices count universes from 1, while some software numbers them differently. Check the universe offset in your software when patching. More in SPI Matrix/Reactivo And Resolume Arena.
Using a Different Software or Console?
Book a free consultation and we'll check how it fits with SPI Matrix or LEC3.
Book a Free Consultation →