Recent Posts

Newsletter

[email protected]
+421 (2) 20 283 002

Shop

Sale!

SPI Matrix + 6 Art-Net Universes LSS software license for free

 350.0  299.0 excl. VAT

Advanced LED controller, which supports Art-Net/sACN (24 full universes in a group of 6 x 512 in case of PRO version) and DMX. Also working in stand-alone mode. Advanced web configuration with quick status bar accessible through a web browser.

 

Control up to 1024 Digital RGB or RGBW LEDs in limited combination with LED Strip Studio software, where you will get 6 Art-Net universes license for free.

 

SKU: controllerSPIMatrix-1 Categories: , Tags: , , , , , , ,
Clear
Description

Description

SPI Matrix lite can be controlled by Art-Net, sACN, DMX or can operate in stand-alone mode. The maximum of programmable RGB / RGBW LEDs is  1024 RGB / 768 RGBW LEDs, which are 6 full Art-net universes. There are 4 SPI LED outputs. The maximum of RGB LEDs per Output is 1024/768 (6 Art-net universes per one SPI Output).

 

Required Input is 5-24V/ 0.3A (PCB only, without the LED strips / LED pixels) and the maximal current is 10 A. Power connector and SPI out connector is standard 4 pin terminal with 5mm contact spacing e.g. SH04-5-GYLED.

 

SPI Matrix supports the most common connectors such as RJ-45, XLR in/out and SPI connectors for your LED strips. You can also find a slot for SD-Card, DIP switch and buttons for control in stand-alone mode. An optimal SD card is Micro SD Card (FAT32, up to 32 GB).

 

LED Strip Studio software license is not included with SPI Matrix, but you can use to control third-party art-net hardware and software. In case you would like to upgrade SPI Matrix on LED Ethernet Controller, contact our support team.

 

This limited action offers you an LSS software license of 6 Art-Net universes for free!

 

Technical specification

Additional information

Weight 489 g
Dimensions 142 × 69 × 44 mm
Maximum of LEDs

4096

SPI LED Outputs

4

Maximum of LEDs per Output

1024

Required Input

5-24V/ 0.3A (PCB only, without the LED strips / LED pixels)

Maximal Current

10A

Power connector

standard 4 pin terminal with 5mm contact spacing e.g. SH04-5-GY

SPI OUT connector

standard 4 pin terminal with 5 mm contact spacing e.g. SH04-5-GY

DMX input connector

XLR 3-pin connector (optional 5 pin)

DMX output connector

XLR 3-pin connector (optional 5 pin)

Ethernet

2x RJ-45 connector, internal switch, 100 Mbit/sec

SD Card

Micro SD Card (FAT32, up to 32GB)

Dimensions

142 x 69 x 44 mm (without mounting brackets)

Weight

468,8 g

Documentation

https://www.ledstripstudio.com/download/tech-specs/SPI_MATRIX_tech.specs.pdf

Warranty

You may also like…