LED Ethernet Controller 3
€ 625.00 – € 1,250.00 excl. VAT
Advanced LED controller, which supports Art-Net (24 universes maximal) and DMX. It can be controlled over LED Strip Studio software 3, any Art-Net software or hardware, lighting consoles, etc.
Also working in stand-alone mode. Advanced web configuration with a quick status bar accessible through a web browser is available.
Controls up to 4096 Digital RGB LEDs or 3072 RGBW LEDs, which are 24 full Art-Net universes. Available in 3 different RGB pixel version 4096/2048/1024, which can be upgraded on a higher number of pixels (up to 4096 RGB pixels).
Description
Advanced Features
- Automatic interpolation
- Active support LSS software and 3rd party ArtNet software and hardware
- Web browser interface – configure and test your LEC3 through your mobile device or computer
- DMX and Ethernet Daisy chaining
- Auto play mode with animation playlist stored on a Micro-SD card
- Easily attachable to DIN profile
- Different pixel-number versions with an optional upgrade (manually or through software on one click)
Additional information
| Weight | 469 g |
|---|---|
| Dimensions | 142 × 69 × 44 mm |
| Maximum of LEDs | 4096 |
| SPI LED Outputs | 4 |
| Maximum of LEDs per Output | 1024 |
| Required power | 5-24V/ 0.3A (PCB only, wihout the LED strips / LED pixels) |
| Maximal current | 10A |
| Power connector | pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY |
| SPI OUT connector | pluggable terminal block with 5 mm contact spacing e.g. SH04-5-GY |
| DMX input connector | XLR 3-pin connector (optional 5 pin) |
| DMX output connector | XLR 3-pin connector (optional 5 pin) |
| Ethernet | 2x RJ-45 connector, internal switch, 100 Mbit/sec |
| SD Card | Micro SD Card (FAT32, up to 32GB) |
| Dimensions | 142 x 69 x 44 mm |
| Documentation | http://www.ledstripstudio.com/download/LEC3HardwareManual.pdf |
| Size | 1024-pixels (6 Art-net universes), 2048-pixels (12 Art-net universes), 4096-pixels (24 Art-net universes) |
| Warranty |
