Recent Posts

Newsletter

info@ledstripstudio.com
+421 (2) 20 283 002

LED Ethernet Controller SPI

LED Strip Studio > LED Ethernet Controller SPI

LED Ethernet Controller SPI

This device is ideal for smaller installations and is able to control all types of LED (WS, TM, APA family). Each effect is located on SD-Card. You can control them over buttons and DMX.

Tech Specs

The most important details about LED Ethernet Controller SPI you can find below. For more detailed description, please contact us.

Maximum od LEDs 1024
SPI LEDs Outputs 1
Maximum od LEDs per Output 1024
Power 5-24 V
Dimensions 90x56x23 mm

As a matter of fact, you’re able to grip it to a standard DIN bar, which helps you to organize everything in complex installations.

Connectors

Except most widely used connectors as Ethernet (Artnet, DMX In/Out, MMX In/ Out)Wireless DMX, Sd-Card for stand-alone mode and buttons for direct control of LED controller.

DMX In/Out over Ethernet

allows you to control LEDs via DMX over Ethernet connector

SPI Out

allows you to send signal to LEDs

MMX In/Out over Ethernet

allows you to control LEDs via MMX over Ethernet connector

SD-Card

allows you stand-alone mode

CONTROLS OVER

Our LED controllers let you work and control them as you wish. That’s the reason why we’re bringing you these 4 ways of controlling your LED devices, straightaway.

Buttons

In case you need to control your LEDs direct from LEC SPI you can use two buttons for that.

DMX

Use DMX standard for controlling your LEDs.

Stand-alone mode

This mode allows you to control LEDs over SD-card and you don’t need any kind of software to control it. Choose effects using by buttons or DMX signal.

Wireless DMX

For more comfortable controlling your LEDs use, please, wireless DMX options. Let us know anything liked to this matter.